• Width: 6-3/4" (Solid Heavy Timber Profile)
• Depth: 24" (Maximum Section Depth)
• Layup / Grade: 24F-V4 Unbalanced Layup (Douglas Fir)
• Appearance Grade: Architectural (Exposed Finish Quality)
• Material: Glue-Laminated Timber (Glulam)
• Certification: APA / ANSI A190.1 code recognized component

• Massive clear-span commercial headers and multi-car garage openings subject to high tributary loads.
• Primary floor transfer girders supporting multi-story framing across wide open ground floors.
• High-capacity ridge beams designed for heavy snow load conditions in custom architectural roofs.
• Exposed heavy-timber entry features, pavilions, and high-ceiling great rooms.

• Mandatory Top Stamp Alignment: 24F-V4 is an unbalanced layup; verify the "TOP" designation faces UP toward the compression zone during installation.
• 24" Section Modulus: Deep section provides maximum edge-wise stiffness to keep extended spans flat and eliminate floor bounce.
• Crane & Rigging Care: Use wide, padded nylon straps during mechanical lifting to prevent crushing or marring the finished architectural surfaces.
• High Bearing Reactions: Review structural plans to ensure post caps and bearing plates provide adequate end-support length for heavy point loads.

Wholesale Hub Terms: Because materials are custom cut and processed to order, transactions operate under strict final-sale terms with no standard returns, credits, or cancellations. Product coverage is limited strictly to transit damage or manufacturing defects that directly compromise structural integrity:

• Identical Exchanges: Verified structural failures qualify for a 1-for-1 replacement. The original defective material must be returned to our driver at the time of the replacement delivery. Cosmetic variations, sun discoloration, and minor yard weathering do not qualify for claims.
• 24-Hour Window: Claims must be reported with clear photo verification within 24 hours of delivery.
• Drop-Zone Rule: To protect against jobsite handling accidents, verification photos must show the material completely untouched in its original drop-zone location as left by our driver, prior to any movement or installation.